TMPM363F10FG Toshiba, TMPM363F10FG Datasheet - Page 671

• Manufacturer Part Number: TMPM363F10FG
• Manufacturer: Toshiba

Specifications of TMPM363F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 100
• Package: LQFP(14x14)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 4
• Uart/sio (ch): 5
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: 8
• 10-bit Ad Converter: 8
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

22.4.5.2
22.4.5.3
22.4.5.4
Top-priority AD has been activated
Conversion
channel
AD conversion is under way is set to "1".
MOD2<ADBFHP>) showing that AD conversion is underway is set to "1". At that time, the value of the
Busy flag ADMOD0<ADBFN> for normal AD conversion before the start of top-priority AD conver-
sions are retained. The value of the conversion completion flag ADMOD0<EOCFN> for normal AD conver-
sion before the start of top-priority AD conversion is retained. .
version is suspended, and restarts normal AD conversion after top-priority AD conversion is completed.
is suspended, and the top-priority AD conversion starts; specifically, AD conversion (fixed-channel sin-
gle conversion) is executed for a channel designated by ADMOD2<HPADCH>. After the result of this top-
priority AD conversion is stored in the storage register ADREGSP, normal AD conversion is resumed.
AD conversion is discontinued when requirements for activation using a H/W activation resource are
met, and top-priority AD conversion (fixed-channel single conversion) starts for a channel designated by
ADMOD2<HPADCH>. After the result of this top-priority AD conversion is stored in the storage regis-
ter ADREGSP, normal AD conversion is resumed.
<HPADCE> is set to "1" during AIN2 conversion, AIN2 conversion is suspended, and conversion is per-
formed for a channel designated by <HPADCH> (AIN7 in the case shown below). After the result of con-
version is stored in ADREGSP, channel repeat conversion is resumed, starting from AIN2.
mode or channel scan repeat conversion mode), write "0" to ADMOD0<REPEAT>. When ongoing AD con-
version is completed, the repeat conversion mode terminates, and ADMOD0<ADBFN> is set to "0".
When normal AD conversion starts, the AD conversion Busy flag (ADMOD0<ADBFN>) showing that
When top-priority AD conversion starts, the top-priority AD conversion Busy flag (AD-
If top-priority AD conversion has been activated during normal AD conversion, ongoing normal AD con-
If ADMOD2<HPADCE> is set to "1" during normal AD conversion, ongoing normal AD conversion
If H/W activation of top-priority AD conversion is authorized during normal AD conversion, ongoing
For example, if channel repeat conversion is activated for channels AIN0 through AIN3 and if
To stop the AD conversion operation in the repeat conversion mode (fixed-channel repeat conversion
Note:Normal AD conversion must not be activated when top-priority AD conversion is under way.
AD Conversion
Top-priority AD conversion during normal AD conversion
Stopping Repeat Conversion Mode
Ch0
Ch1
Ch2
Page 645
Ch7
Ch2
Ch3
Ch0
TMPM363F10FG