TMPM363F10FG Toshiba, TMPM363F10FG Datasheet - Page 577

• Manufacturer Part Number: TMPM363F10FG
• Manufacturer: Toshiba

Specifications of TMPM363F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 100
• Package: LQFP(14x14)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 4
• Uart/sio (ch): 5
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: 8
• 10-bit Ad Converter: 8
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

Threshold 1
Threshold 2
Waveform pattern in phase method
Remote control signal data in phase method
phase method. Each threshold can be configured with the RMCRCR3 <RMCDATL[6:0]> bits and
<RMCDATH[6:0]> bits.
falling edges is "T", three patterns show cycles of 1T, 1.5T and 2T. Details of the two thresholds are
shown below.
ing data are required. In addition, the signal needs to start from data "11".
By setting RMCRCR2<RMCPHM> = "1", RMC enables to receive a remote control signal in the
Two thresholds are used to distinguish three waveform patterns. On condition that a cycle between two
To determine a remote control signal in the phase method, three patterns of data waveform and preced-
Pattern2
Pattern1
Pattern3
Pattern 1 & pattern 2
Pattern 2 & pattern 3
Determined by
Cycle T
Data"1"
1T to 1.5T
1.5T to 2T
Threshold
Page 551
Data"0"
RMCRCR3<RMCDATH[6:0]>
RMCRCR3<RMCDATL[6:0]>
A pulse shape in cycle indicates
whether it is data "0" or data "1".
Register bits to set
TMPM363F10FG