SAM9G20 Atmel Corporation, SAM9G20 Datasheet - Page 236

• Manufacturer Part Number: SAM9G20
• Manufacturer: Atmel Corporation

Specifications of SAM9G20

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 7
• Ssc: 1
• Ethernet: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: Yes
• Adc Channels: 4
• Adc Resolution (bits): 10
• Adc Speed (ksps): 95
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

23.4.4
Register Name:ECC_SR2
Access Type:Read-only
• RECERR8: Recoverable Error in the page between the 2048th and the 2303rd bytes
Fixed to 0 if
0 = No Errors Detected.
1 = Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise multiple uncorrected errors
were detected
• ECCERR8: ECC Error in the page between the 2048th and the 2303rd bytes
Fixed to 0 if TYPECORREC = 0.
0 = No Errors Detected.
1 = A single bit error occurred in the ECC bytes.
Read ECC Parity 8 register, the error occurred at the location which contains a 1 in the least significant 24 bits.
• MULERR8: Multiple Error in the page between the 2048th and the 2303rd bytes
Fixed to 0 if TYPECORREC = 0
0 = No Multiple Errors Detected.
1 = Multiple Errors Detected.
• RECERR9: Recoverable Error in the page between the 2304th and the 2559th bytes
Fixed to 0 if
0 = No Errors Detected.
1 = Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise multiple uncorrected errors
were detected.
• ECCERR9: ECC Error in the page between the 2304th and the 2559th bytes
Fixed to 0 if
0 = No Errors Detected.
1 = A single bit error occurred in the ECC bytes.
Read ECC Parity 9 register, the error occurred at the location which contains a 1 in the least significant 24 bits.
• MULERR9: Multiple Error in the page between the 2304th and the 2559th bytes
Fixed to 0 if
236
31
23
15
–
–
–
7
–
AT91SAM9G20
ECC Status Register 2
TYPECORREC = 0.
TYPECORREC = 0.
TYPECORREC = 0.
TYPECORREC = 0.
ECCERR15
ECCERR13
MULERR11
MULERR9
30
22
14
6
.
ECCERR15
ECCERR13
ECCERR11
ECCERR9
29
21
13
5
RECERR15
RECERR13
RECERR11
RECERR9
28
20
12
4
27
19
11
–
–
–
3
–
ECCERR14
ECCERR12
MULERR10
ECCERR8
26
18
10
2
ECCERR14
ECCERR12
ECCERR10
ECCERR8
25
17
9
1
6384E–ATARM–05-Feb-10
–RECERR14
RECERR12
RECERR10
RECERR8
24
16
8
0