PEB20256E-V21 Infineon Technologies, PEB20256E-V21 Datasheet - Page 165

• Manufacturer Part Number: PEB20256E-V21
• Description: IC CONTROLLER INTERFACE 388-BGA
• Manufacturer: Infineon Technologies

Specifications of PEB20256E-V21

• Function: Multichannel Network Interface Controller (MUNICH)
• Interface: HDLC, PPP, Serial, TMA
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 200mA
• Power (watts): 3W
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 388-BBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Circuits: -
• Other names: PEB20256E-V21; PEB20256E-V21IN

RCL
LPID
LCID
Data Sheet
0
1
Remote Channel Loop
The remote channel loop switches incoming data of one channel to the
outgoing bit stream of the same channel. The bit rate of the receiver and
the transmitter must be the same. The channel to be looped can be
selected using bit field LCID. One channel at a time can be looped.
0
1
Port Identifier
This bit field selects the port which shall be switched to the test port. See
also bit CONF1.TBE.
Loop Channel Identifier
This bit field selects the channel which shall be looped through the
internal loop buffer.
The incoming transmit clock of port zero is visible on pin TCLKO.
This function is available when port zero is operated in
unchannelized mode.
Pin TCLKO is set to tri-state.
Disable remote channel loop.
Enable remote channel loop.
165
Register Description
PEB 20256 E
PEF 20256 E
04.2001