3F88L-CG001N Omron, 3F88L-CG001N Datasheet - Page 4

• Manufacturer Part Number: 3F88L-CG001N
• Description: CABLE CAM OUTPUT-I/O BLOCK 1M
• Manufacturer: Omron

Specifications of 3F88L-CG001N

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3F88LCG001N

Intended Audience
General Precautions
Safety Precautions
General Warnings
!
!
!
!
WARNING
WARNING
WARNING
WARNING
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
S Personnel in charge of installing FA systems.
S Personnel in charge of designing FA systems.
S Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifications described in the op-
eration manuals.
Before using the product under conditions which are not described in the manual or applying the
product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion sys-
tems, medical equipment, amusement machines, safety equipment, and other systems, machines,
and equipment that may have a serious influence on lives and property if used improperly, consult
your OMRON representative.
Make sure that the ratings and performance characteristics of the product are sufficient for the sys-
tems, machines, and equipment, and be sure to provide the systems, machines, and equipment with
double safety mechanisms.
This manual provides information for programming and operating the Unit. Be sure to read this manu-
al before attempting to use the Unit and keep this manual close at hand for reference during opera-
tion.
It is extremely important that a PC and all PC Units be used for the specified purpose
and under the specified conditions, especially in applications that can directly or
indirectly affect human life. You must consult with your OMRON representative
before applying a PC System to the above-mentioned applications.
Do not attempt to disassemble the Unit while power is being supplied. Doing so may
result in electrical shock.
Do not touch any of the terminals while power is being supplied. Doing so may result
in electrical shock.
Take safety measures outside the Cam Positioner to ensure safety for the entire
system in the event of Cam Positioner failure or error caused by external factors of
the Cam Positioner.
Faulty operations may result in serious accidents.
S Emergency stop circuits, interlock circuits, limit circuits, and similar safety mea-
S The Cam Positioner turns OFF all outputs when its self-diagnostic function detects
S The Cam Positioner output may remain ON or OFF due to damage to an output
sures must be included in control circuits outside the Cam Positioner.
an error (ERROR is OFF), when TRIG input turns ON, or when RESET input turns
ON. Take safety measures outside the Cam Positioner to ensure safety for the en-
tire system in such an event.
transistor or for some other reason. Take safety measures outside the Cam Posi-
tioner to ensure safety for the entire system in such an event.