3F88L-CG001N Omron, 3F88L-CG001N Datasheet - Page 172

• Manufacturer Part Number: 3F88L-CG001N
• Description: CABLE CAM OUTPUT-I/O BLOCK 1M
• Manufacturer: Omron

Specifications of 3F88L-CG001N

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3F88LCG001N

Communications
H Manuals for Related Devices and Support Tools
H Standard System Protocols (Sequence Numbers)
• To execute a CompoWay/F command for the Cam Positioner, execute sequence No. 600 (#0258) or
• The following table shows a relationship between sequence numbers and CompoWay/F commands
H Using CompoWay/F Standard System Protocol
• To send CompoWay/F commands from a CS1-series Programmable Controller to a Cam Positioner
• Use the following procedure to specify PMCR instructions.
4-24
SYSMAC CS1-series Programmable Controllers Operation Manual
SYSMAC CS1-series Programmable Controllers Programming Manual
SYSMAC CS1-series Serial Communications Boards/Unit Operation Manual
CX-Protocol Operation Manual
Sequence No. 600 (#0258):
Data transfer with ASCII code
conversion
With response
Sequence No. 602 (#025A):
Data transfer without ASCII code
conversion
With response
1. Specify the sequence number as a hexadecimal value in the second operand of the PMCR instruc-
2. The first table Send Data Word Allocations (Third Operand of PMCR Instruction) on the following
3. The second table Receive Data Word Allocations (Fourth Operand of PMCR Instruction) on the fol-
sequence No. 602 (#025A) within the standard system protocol by using a PMCR instruction.
for the Cam Positioner.
by using protocol macros, execute the send-receive sequences of the CompoWay/F Master protocol
provided as a standard system protocol by using protocol macro (PMCR) instructions within the ladder
program of the CS1-series CPU Unit.
tion.
page shows the data format of operand S and subsequent operands in the PMCR instruction. Spec-
ify this format of data in operand S and subsequent operands.
lowing page shows the data format of operand D and subsequent operands in the PMCR instruc-
tion. This format of data will be set in operand D and subsequent operands. Normally, set 0000 Hex
as the default value in D+0.
Standard system protocol
Control data: Communications port No., serial port No., destination unit address
Control data: Send-receive sequence No. (0258 Hex for sequence No. 600, 025A Hex for sequence No. 602)
First word No. of send data
First word No. of received data storage
Title
• Memory Area Read (0101 Hex)
• Parameter Area Write (0202 Hex)
• Parameter Area Read (0201 Hex)
• Controller Status Read (0601 Hex)
• Operation Command (3005 Hex)
• Controller Data Read (0501 Hex)
• Unit Attribute Read (0503 Hex)
• Internode Echo Test (0801 Hex)
CompoWay/F commands for Cam Positioner
W339
W340
W336
W344
Number
Chapter 4