Z16FMC64AG20EG Zilog, Z16FMC64AG20EG Datasheet - Page 158

• Manufacturer Part Number: Z16FMC64AG20EG
• Description: Microcontrollers (MCU) 16BIT 64K FL 4K RAM 2UART 12CH 10BIT A/D
• Manufacturer: Zilog
• Series: Z16FMCr

Specifications of Z16FMC64AG20EG

• Processor Series: Z16FMC
• Core: ZNEO
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 64 KB
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 46
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Package / Case: LQFP-64
• Development Tools By Supplier: Z16FMC28200KITG
• Minimum Operating Temperature: - 40 C
• Core Processor: ZNEO
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 46
• Eeprom Size: -
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Lead Free Status / Rohs Status: Details

Table 79. LIN Control Register (UxCTL1 with MSEL = 010b)
PS028702-1210
Bits
Field
RESET
R/W
ADDR
Bits
7
6
5
4
3:2
1:0
Description
LMST – LIN Master Mode
0 = LIN Master mode not selected.
1 = LIN Master mode selected (if MPEN, PEN, LSLV = 0)
LSLV – LIN Slave Mode
0 = LIN Slave mode not selected.
1 = LIN Slave mode selected (if MPEN, PEN, LMST = 0)
ABEN – Autobaud Enable
0 = Autobaud not enabled.
1 = Autobaud enabled if in LIN SLAVE mode.
ABIEN – Autobaud Interrupt Enable
0 = Interrupt following autobaud does not occur.
1 = Interrupt following autobaud enabled if in LIN SLAVE mode. When the autobaud character
is received, a receive interrupt is generated and the ATB bit is set in the Status 0 Register.
LinState[1:0] – LIN State Machine
The LinState is controlled by both hardware and software. Software force a state change at any
time if necessary. In normal operation, software moves the state in and out of Sleep state. For
a LIN Slave, software changes the state from Sleep to Wait for Break after which hardware
cycles through the Wait for Break, Autobaud and Active states. Software changes the state
from one of the active states to Sleep state if the LIN bus goes into Sleep mode. For a LIN
Master, software changes state from Sleep to Active where it remains until software sets it
back to the Sleep state. After configuration software does not alter the LinState field during
operation.
00 = Sleep State (either LMST or LSLV is set)
01 = Wait for Break state (only valid for LSLV = 1)
10 = Autobaud state (only valid for LSLV = 1)
11 = Active state (either LMST or LSLV is set)
TxBreakLength – Used in LIN mode by the master to control the duration of the transmitted
Break.
00 = 13 bit times
01 = 14 bit times
10 = 15 bit times
11 = 16 bit times
LMST
R/W
7
0
LIN Control Register (LIN-UART Control1 Register with MSEL = 010b)
When
MSEL
LSLV
R/W
6
0
=
010b
, this register provides control for LIN mode of operation.
ABEN
FF_E203H, FF_E213H with MSEL = 010b
R/W
5
0
P R E L I M I N A R Y
ABIEN
R/W
4
0
R/W
Z16FMC Series Motor Control MCUs
3
0
LinState[1:0]
R/W
2
0
Product Specification
R/W
TxBreakLength
1
0
LIN-UART
R/W
0
0
136