C200HW-BI101-V1 Omron, C200HW-BI101-V1 Datasheet - Page 91

• Manufacturer Part Number: C200HW-BI101-V1
• Description: BACKPLANE, 10 SLOT, I/O EXP
• Manufacturer: Omron

Specifications of C200HW-BI101-V1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Wiring
External Wiring
Interlock Circuits
76
If power cables must be run alongside the I/O wiring (that is, in parallel with it), at
least 300 mm must be left between the power cables and the I/O wiring as shown
below.
Where:
If the I/O wiring and power cables must be placed in the same duct (for example,
where they are connected to the equipment), they must be shielded from each
other using grounded metal plates.
Where:
When the PC controls an operation such as the clockwise and counterclock-
wise operation of a motor, provide an external interlock such as the one
shown below to prevent both the forward and reverse outputs from turning
ON at the same time.
PC
1
1 = I/O wiring
2 = General control wiring
3 = Power cables
1 = I/O wiring
2 = General control wiring
3 = Power cables
00501
00502
Low current cable
Control cable
Power cable
Interlock circuit
2
1
2
3
MC2
MC1
Class-3 ground
Class-3 ground
300 mm min.
300 mm min.
3
MC1
MC2
Motor clockwise
Motor counterclockwise
Metal plate (iron)
200 mm min.
Section 3-2