C200HW-BI101-V1 Omron, C200HW-BI101-V1 Datasheet - Page 39

• Manufacturer Part Number: C200HW-BI101-V1
• Description: BACKPLANE, 10 SLOT, I/O EXP
• Manufacturer: Omron

Specifications of C200HW-BI101-V1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Units
2-2-5 Backplanes
CPU Backplane
I/O Backplane
24
1, 2, 3...
Note Attach a C500-COV01 Connector Cover to any slot that is not being used to pre-
There are two types of Backplane: the CPU Backplane, used for the CPU Rack,
and the I/O Backplane, used for Expansion I/O Racks. The Backplane serves to
hold and connect the following types of Unit: the CPU Unit, the Power Supply
Unit, I/O Units, Special I/O Units, etc.
The components of the Backplanes are shown in the following diagrams and
described following them. The numbers in the diagram correspond to the num-
bers of the following items in the description.
vent dust and dirt from entering the unused connectors.
1. Backplane Mounting Screws
2. Power Supply Unit Connector
3. CPU Unit Connector
4. Unit Mounting Slots
5. Unit Connectors
6. Unit Lock Levers
7. I/O Connecting Cable Connector
7. I/O Connecting Cable connector
Mount the Backplane firmly using four M4 screws.
Connect the Power Supply Unit.
Connect the CPU Unit.
Mount one Unit to each slot. There are 3, 5, 8, or 10 slots available on the
Backplane depending on the model of Backplane used.
Connect I/O Units, Special I/O Units, Interrupt Input Units, and/or Analog
Timer Units.
The lock levers hold the Units in place. Press down on the level and pull up
on the Unit to release the lock.
Connect the I/O Cable from the CPU Rack to the first Expansion I/O Rack or
between adjacent Expansion I/O Racks to this connector.
4. Unit mounting slots
7. I/O Connecting Cable connector
4. Unit mounting slots
6. Unit lock levers
6. Unit lock levers
5. Unit connector
5. Unit connector
3. CPU Unit
connector
1. Backplane
2. Power Supply
mounting
screw
Unit connector
1. Backplane
2. Power Supply
Section 2-2
mounting
screw
Unit connector