C200HW-BI101-V1 Omron, C200HW-BI101-V1 Datasheet - Page 13

• Manufacturer Part Number: C200HW-BI101-V1
• Description: BACKPLANE, 10 SLOT, I/O EXP
• Manufacturer: Omron

Specifications of C200HW-BI101-V1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5
xiv
Application Precautions
Application Precautions
!
!
WARNING
!
Caution
Caution
• Locations subject to strong electromagnetic fields.
• Locations subject to possible exposure to radioactivity.
• Locations close to power supplies.
The operating environment of the PC system can have a large effect on the lon-
gevity and reliability of the system. Improper operating environments can lead to
malfunction, failure, and other unforeseeable problems with the PC system. Be
sure that the operating environment is within the specified conditions at installa-
tion and remains within the specified conditions during the life of the system.
Observe the following precautions when using the PC system.
Always heed these precautions. Failure to abide by the following precautions
could lead to serious or possibly fatal injury.
• Always ground the system to 100 Ω or less when installing the Units. Not con-
• Always turn OFF the power supply to the PC before attempting any of the fol-
Failure to abide by the following precautions could lead to faulty operation of the
PC or the system, or could damage the PC or PC Units. Always heed these pre-
cautions.
• Fail-safe measures must be taken by the customer to ensure safety in the
• Always use the power supply voltages specified in this manual. An incorrect
• Take appropriate measures to ensure that the specified power with the rated
• Install external breakers and take other safety measures against short-circuit-
• Do not apply voltages to the Input Units in excess of the rated input voltage.
• Do not apply voltages or connect loads to the Output Units in excess of the
• Disconnect the functional ground terminal when performing withstand voltage
• Be sure that all the mounting screws, terminal screws, and cable connector
necting to a ground of 100 Ω or less may result in electric shock.
lowing. Not turning OFF the power supply may result in malfunction or electric
shock.
event of incorrect, missing, or abnormal signals caused by broken signal lines,
momentary power interruptions, or other causes.
voltage may result in malfunction or burning.
voltage and frequency is supplied. Be particularly careful in places where the
power supply is unstable. An incorrect power supply may result in malfunction.
ing in external wiring. Insufficient safety measures against short-circuiting may
result in burning.
Excess voltages may result in burning.
maximum switching capacity. Excess voltage or loads may result in burning.
tests. Not disconnecting the functional ground terminal may result in burning.
screws are tightened to the torque specified in this manual. Incorrect tighten-
ing torque may result in malfunction.
• Mounting or dismounting I/O Units, CPU Units, Memory Cassettes, Power
• Assembling the Units.
• Setting DIP switches or rotary switches.
• Connecting cables or wiring the system.
• Connecting or disconnecting the connectors.
Supply Units, or any other Units.
5