101-1279 Rabbit Semiconductor, 101-1279 Datasheet - Page 29

• Manufacturer Part Number: 101-1279
• Description: PLASTIC ENCLOSURE FOR BL4S100
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1279

• Accessory Type: Enclosure
• Product: Prototyping Accessories
• Processor Type: BL4S100
• Board Size: 146 mm x 96 mm x 16 mm
• Interface Type: Ethernet
• For Use With/related Products: BL4S100
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1159

3.4 A/D Converter Inputs
The single A/D converter chip used in the BL4S100 has a resolution of 12 bits (11 bits for
the value and one bit for the polarity). The A/D converter chip has a programmable-gain
amplifier. Each external input has circuitry that provides scaling and filtering. All 8 external
inputs are scaled and filtered to provide the user with an input impedance of 1 M and a
variety of single-ended unipolar, and differential bipolar ranges as shown in Table 6.
Figure 11 shows a pair of A/D converter input circuits. The resistors form an approx. 10:1
attenuator, and the capacitors filter noise pulses from the A/D converter inputs.
The A/D converter chip can only accept positive voltages. By pairing the analog inputs,
differential bipolar measurements are possible, and can be configured for each channel pair
with the
voltage ranges are listed in Table 6.
BL4S100 User’s Manual
opmode
parameter in the
Figure 11. Buffered A/D Converter Inputs
anaInConfig()
W
W
software function call. The available
W
W
27