101-1279 Rabbit Semiconductor, 101-1279 Datasheet - Page 125

• Manufacturer Part Number: 101-1279
• Description: PLASTIC ENCLOSURE FOR BL4S100
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1279

• Accessory Type: Enclosure
• Product: Prototyping Accessories
• Processor Type: BL4S100
• Board Size: 146 mm x 96 mm x 16 mm
• Interface Type: Ethernet
• For Use With/related Products: BL4S100
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1159

C.1 Connecting Demonstration Board
Before running sample programs based on the Demonstration Board, you will have to con-
nect the Demonstration Board from the BL4S100 Tool Kit to the BL4S100 board. Proceed
as follows.
1. Use wires to connect screw-terminal header J3 on the Demonstration Board to header
2. Make sure that your BL4S100 is connected to your PC via the programming cable and
BL4S100 User’s Manual
J4 on the BL4S100. The connections are shown in Figure C-1, with the green wire to
GND and the blue wire to +V.
that the power supply is connected to the BL4S100 and plugged in as described in
Chapter 2, “Getting Started.”
Figure C-1. Power Supply Connections Between BL4S10 and Demonstration Board
CAUTION: If you are using your own power supply with the Demonstration Board,
note that the maximum power supply input voltage the Demonstration Board can
handle is + 12 V DC. Do not use a higher power supply voltage.
123