101-1279 Rabbit Semiconductor, 101-1279 Datasheet - Page 103

• Manufacturer Part Number: 101-1279
• Description: PLASTIC ENCLOSURE FOR BL4S100
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1279

• Accessory Type: Enclosure
• Product: Prototyping Accessories
• Processor Type: BL4S100
• Board Size: 146 mm x 96 mm x 16 mm
• Interface Type: Ethernet
• For Use With/related Products: BL4S100
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1159

•
•
•
BL4S100 User’s Manual
RWEB_IO_SAMPLE.C
ple I/O lines (analog and digital) in a Web browser, and allows the user to change the
digital outputs by clicking the buttons on the page.
The sample program uses an IFRAME (invisible frame) to refresh the I/O readings
every two seconds. Since the Web browser does not have to re-render the entire page,
updates are quick and flicker free.
Once the sample program is compiled and running, open your PC Web browser. As
long as you have not modified the
the following server address in your Web browser to bring up the Web page served by
the sample program.
Now use a wire to touch +5 V from header J4 on the BL4S100 to the various digital and
analog inputs on header J3, J15, and J16
SMTP.C
Demonstration Board is pressed.
TELNET.C
This program takes anything that comes in on a port and sends it out Serial Port D and
displays the content in the Dynamic C
that the TCP/IP connection should be closed and a digital output to toggle an LED to
indicate that there is an active connection.
Once the sample program is compiled and running, start the Telnet program on your PC
(
FIG 1
use the TCP/IP settings you entered in the
you type will be printed in Dynamic C's
receiving the characters typed via TCP/IP.
Start > Run telnet 10.10.6.100
http://10.10.6.100
macro in the sample program, the IP address is 10.10.6.100 as shown; otherwise
—Uses the SMTP library to send an e-mail when a pushbutton switch on the
—Allows you to communicate with the BL4S100 using the Telnet protocol.
—Demonstrates using RabbitWeb to display the status of multi-
TCPCONFIG 1
). As long as you have not modified the
STDIO
STDIO
TCP_CONFIG.LIB
window. It uses a digital input to indicate
window, indicating that the board is
macro in the sample program, enter
library. Each character
TCPCON-
101