101-1279 Rabbit Semiconductor, 101-1279 Datasheet - Page 110

• Manufacturer Part Number: 101-1279
• Description: PLASTIC ENCLOSURE FOR BL4S100
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1279

• Accessory Type: Enclosure
• Product: Prototyping Accessories
• Processor Type: BL4S100
• Board Size: 146 mm x 96 mm x 16 mm
• Interface Type: Ethernet
• For Use With/related Products: BL4S100
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1159

The XBee sample programs in the Dynamic C
the XBee function calls.
•
•
BL4S100 User’s Manual
Channel mask — defaults to 0x1FFE, i.e., all 16 possible channels via the macro in the
Dynamic C
you want to limit the channels used, all devices on your network should use the same
channel mask.
Extended PAN ID — the 64-bit network ID. Defaults to
Dynamic C
0x0123456789abcdef
If set to
and end devices to “join any network.”
Change the extended PAN ID if you are developing simultaneously with more than one
ZigBee coordinator.
Node ID — the ID of your particular node via the macro in the Dynamic C
Rabbit4000\XBee\XBee_Firmware\XBEE_API.LIB
have a unique identifier.
AT_INTERACTIVE.C
commands with the XBee RF module.
The program will print out a list of AT commands in the Dynamic C
You may type in either “ATxx” or just the “xx” part of the command.
AT_RUNONCE.C
AT commands. Several commands can either set a parameter or read it. This sample
program simply reads the parameters and displays the results.
Compile and run this sample program. The program will display the results in the
Dynamic C
• Use just the AT command to read any of the values.
• Use [AT]xx yyyy (where the y is an integer up to 32 bits) to set any of the “set or read” values.
• Type “menu” to redisplay the menu of commands.
• Press
#define DEFAULT_CHANNELS XBEE_DEFAULT_CHANNELS
#define DEFAULT_EXTPANID "0x0123456789abcdef"
#define NODEID_STR "RabbitXBee"
(Note that this works for NI, the node identifier, where the data will be a Node ID.string in quotes
— [AT]NI "Node ID string” where the quotes contain the string data)
0x00
F4
STDIO
LIB\Rabbit4000\XBee\XBee_Firmware\XBEE_API.LIB
LIB\Rabbit4000\XBee\XBEE_API.LIB
to exit and close the
, tells coordinators to “select a random extended PAN ID,” and tells routers
—This sample program uses many of the most important and useful
window.
—This sample program shows how to set up and use AT
to match the default used on the Digi
STDIO
window.
SAMPLES\XBee
DEFAULT_PANID
library, otherwise defaults to
library. Each node should
folder illustrate the use of
®
XBee USB.
STDIO
if set in the
LIB\
library. If
window.
108