101-1279 Rabbit Semiconductor, 101-1279 Datasheet - Page 137

• Manufacturer Part Number: 101-1279
• Description: PLASTIC ENCLOSURE FOR BL4S100
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1279

• Accessory Type: Enclosure
• Product: Prototyping Accessories
• Processor Type: BL4S100
• Board Size: 146 mm x 96 mm x 16 mm
• Interface Type: Ethernet
• For Use With/related Products: BL4S100
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1159

Make the following modifications to the
run it according to whether you will be using the BL4S100/BL4S150 as a coordinator, a
router, or an end device.
• Select the XBee role macro according to whether the BL4S100/BL4S150 is being used
• Some Rabbit boards use the ZNet 2.5 protocol. The BL4S100/BL42150 use the ZB
F.2 Digi
The Digi XBee USB device is an optional accessory and is available as a part of the Mesh
Networking Add on Kit (101-1272), or for separate purchase (101-1286). It is not a part of
the standard BL4S200 Tool Kit.
You may experience difficulty when you use the ZigBee sample programs and the Digi
XBee USB with the default settings if you are working simultaneously with more than one
ZigBee coordinator.
Section 6.2.2 explains how to set up the BL4S100/BL4S150 configuration patterns for the
sample programs via macros in the Dynamic C
library folder.
The same configurations must then be applied to the Digi
utility. If you have not previously used this utility, install it from the Dynamic C
Utilities\X-CTU
BL4S100 User’s Manual
as a coordinator, a router or an end-device.
protocol. Make sure the
Channel mask — defaults to 0x1FFE, i.e., all 16 possible channels via the macro in the
Dynamic C
For example, to limit the channels to three channels, the macro would read as follows.
Extended PAN ID — the 64-bit network ID. Defaults to
Dynamic C
0x0123456789abcdef
If set to
and end devices to “join any network.”
Change the extended PAN ID if you are developing simultaneously with more than one
ZigBee coordinator.
#define XBEE_ROLE NODE_TYPE_COORD
#define XBEE_ROLE NODE_TYPE_ROUTER
#define XBEE_ROLE NODE_TYPE_ENDDEV
#define XBEE_PROTOCOL XBEE_PROTOCOL_ZB
#define DEFAULT_EXTPANID "0x0123456789abcdef"
#define DEFAULT_CHANNELS ZB_DEFAULT_CHANNELS
#define DEFAULT_CHANNELS 0x000E
0x00
®
XBee USB Configuration
LIB\Rabbit4000\XBee\XBEE_API.LIB
LIB\Rabbit4000\XBee\XBEE_API.LIB
, tells coordinators to “select a random extended PAN ID,” and tells routers
folder by double-clicking
#define
to match the default used on the Digi
statement calls for the ZB protocol.
MODEMFWLOAD.C
LIB\Rabbit4000\XBee\XBEE_API.LIB
Setup_x-ctu.exe
®
DEFAULT_PANID
XBee USB via Digi’s X-CTU
library.
library, otherwise defaults to
sample program.before you
®
XBee USB.
,
if set in the
135
®