101-1279 Rabbit Semiconductor, 101-1279 Datasheet - Page 14

• Manufacturer Part Number: 101-1279
• Description: PLASTIC ENCLOSURE FOR BL4S100
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1279

• Accessory Type: Enclosure
• Product: Prototyping Accessories
• Processor Type: BL4S100
• Board Size: 146 mm x 96 mm x 16 mm
• Interface Type: Ethernet
• For Use With/related Products: BL4S100
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1159

Step 2 — Connect Power Supply
Once all the other connections have been made, you can connect power to the BL4S100.
First, prepare the AC adapter for the country where it will be used by selecting the plug.
The Tool Kit presently includes Canada/Japan/U.S., Australia/N.Z., U.K., and European
style plugs. Snap in the top of the plug assembly into the slot at the top of the AC adapter
as shown in Figure 3, then press down on the spring-loaded clip below the plug assembly
to allow the plug assembly to click into place. Release the clip to secure the plug assembly
in the AC adapter.
Connect the power supply to header J17 on the BL4S100 as shown in Figure 3. Be sure to
match the latch mechanism with the top of the connector to header J17 on the BL4S100 as
shown. The Micro-Fit
®
connector will only fit one way.
Figure 3. Power Supply Connections
Plug in the AC adapter. The red LED next to the power connector at J17 should light up.
The BL4S100 is now ready to be used.
CAUTION: Unplug the power supply while you make or otherwise work with the connections
to the headers. This will protect your BL4S100 from inadvertent shorts or power spikes.
2.1.1 Hardware Reset
A hardware reset is done by unplugging the power supply, then plugging it back in, or by
pressing the
RESET
button located next to the Ethernet jack.
BL4S100 User’s Manual
12