PIC18F66J15-I/PT Microchip Technology, PIC18F66J15-I/PT Datasheet - Page 63

• Manufacturer Part Number: PIC18F66J15-I/PT
• Description: IC PIC MCU FLASH 48KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F66J15-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 96KB (48K x 16)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 50
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3936 B
• Interface Type: SPI/I2C/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 50
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183032, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• Package: 64TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6.1.3
The 80-pin devices in this family can address up to a
total of 2 Mbytes of program memory. This is achieved
through the external memory bus. There are two
distinct operating modes available to the controllers:
• Microcontroller (MC)
• Extended Microcontroller (EMC)
The program memory mode is determined by setting
the EMB Configuration bits (CONFIG3L<5:4>), as
shown in Register 6-1. (See also Section 24.1
“Configuration Bits” for additional details on the
device Configuration bits.)
The program memory modes operate as follows:
• The Microcontroller Mode accesses only on-chip
REGISTER 6-1:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value after erase
bit 7
bit 6
bit 5-4
bit 3
bit 2-0
Flash memory. Attempts to read above the top of
on-chip memory causes a read of all ‘0’s (a NOP
instruction).
The Microcontroller mode is also the only operating
mode available to 64-pin devices.
R/WO-1
WAIT
PIC18F8XJ10/8XJ15 PROGRAM
MEMORY MODES
Wait: External Bus Wait Enable bit
1 = Wait states on the external bus are disabled
0 = Wait states on the external bus are enabled and selected by MEMCON<5:4>
BW: Data Bus Width Select bit
1 = 16-Bit Data Width modes
0 = 8-Bit Data Width modes
EMB<1:0>: External Memory Bus Configuration bits
11 = Microcontroller mode, external bus disabled
10 = Extended Microcontroller mode, 12-bit address width for external bus
01 = Extended Microcontroller mode, 16-bit address width for external bus
00 = Extended Microcontroller mode, 20-bit address width for external bus
EASHFT: External Address Bus Shift Enable bit
1 = Address shifting enabled – external address bus is shifted to start at 000000h
0 = Address shifting disabled – external address bus reflects the PC value
Unimplemented: Read as ‘0’
R/WO-1
BW
CONFIG3L: CONFIGURATION REGISTER 3 LOW
WO = Write-Once bit
‘1’ = Bit is set
R/WO-1
EMB1
R/WO-1
EMB0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PIC18F87J10 FAMILY
EASHFT
R/WO-1
• The Extended Microcontroller Mode allows
The setting of the EMB Configuration bits also controls
the address bus width of the external memory bus. This
is covered in more detail in Section 8.0 “External
Memory Bus”.
In all modes, the microcontroller has complete access
to data RAM.
Figure 6-3 compares the memory maps of the different
program memory modes. The differences between
on-chip and external memory access limitations are
more fully explained in Table 6-2.
access to both internal and external program
memories as a single block. The device can
access its entire on-chip program memory; above
this, the device accesses external program
memory up to the 2-Mbyte program space limit.
Execution automatically switches between the
two memories as required.
U-0
—
x = Bit is unknown
U-0
—
DS39663F-page 61
U-0
—
bit 0