MC68HC908LK24 MOTOROLA [Motorola, Inc], MC68HC908LK24 Datasheet - Page 350

• Manufacturer Part Number: MC68HC908LK24
• Description: Microcontrollers
• Manufacturer: MOTOROLA [Motorola, Inc]

Liquid Crystal Display (LCD) Driver
17.2 Introduction
17.3 Features
17.4 Pin Name Conventions and I/O Register Addresses
Data Sheet
350
LCD Generic Pin Name
FP11–FP18
FP19–FP26
FP27–FP32
FP1–FP10
BP0–BP2
FP0/BP3
This section describes the liquid crystal display (LCD) driver module.
The LCD driver module can drive a maximum of 33 frontplanes and 4
backplanes, depending on the LCD duty selected.
Features of the LCD driver module include the following:
Three dedicated I/O pins are for the backplanes, BP0–BP2; sixteen
dedicated I/O pins are for the frontplanes, FP1–FP10 and FP27–FP32;
and the sixteen frontplanes, FP11–FP26, are shared with port C and E
pins. FP0 and BP3 shares the same pin and configured by the
DUTY[1:0] bits in the LCD clock register.
The full names of the LCD output pins are shown in
generic pin names appear in the text that follows.
Freescale Semiconductor, Inc.
•
•
•
For More Information On This Product,
Table 17-1. Pin Name Conventions
Software programmable driver segment configurations:
– 32 frontplanes × 4 backplanes (128 segments)
– 33 frontplanes × 3 backplanes (99 segments)
– 33 frontplanes × 1 backplane (33 segments)
LCD bias voltages generated by internal resistor ladder
Software programmable contrast control
Liquid Crystal Display (LCD) Driver
PTC0/FP19–PTC7/FP26
PTE0/FP11–PTE7/FP18
Full MCU Pin Name
Go to: www.freescale.com
FP27–FP32
FP1–FP10
BP0–BP2
FP0/BP3
Pin Selected for LCD Function by:
PCEL:PCEH in CONFIG2
MC68HC908LJ24/LK24 — Rev. 2
PEE in CONFIG2
—
—
—
—
Table
17-1. The
MOTOROLA