MC68HC908LK24 MOTOROLA [Motorola, Inc], MC68HC908LK24 Datasheet - Page 188

• Manufacturer Part Number: MC68HC908LK24
• Description: Microcontrollers
• Manufacturer: MOTOROLA [Motorola, Inc]

Monitor ROM (MON)
10.6.7 EE_WRITE
Data Sheet
188
EE_WRITE is used to write a set of data from the data array to FLASH.
The start location of the FLASH to be programmed is specified by the
address ADDRH:ADDRL and the number of bytes in the data array is
specified by DATASIZE. The minimum number of bytes that can be
programmed in one routine call is 2 bytes, the maximum is 15 bytes.
ADDRH:ADDRL must always be the start of boundary address (the page
start address: $XX00 or $0080) and DATASIZE must be the same size
when accessing the same page.
In some applications, the user may want to repeatedly store and read a
set of data from an area of non-volatile memory. This is easily possible
when using an EEPROM array. As the write and erase operations can
be executed on a byte basis. For FLASH memory, the minimum erase
size is the page — 128 bytes per page for MC68HC908LJ24. If the data
array size is less than the page size, writing and erasing to the same
page cannot fully utilize the page. Unused locations in the page will be
wasted. The EE_WRITE routine is designed to emulate the properties
similar to the EEPROM. Allowing a more efficient use of the FLASH page
for data storage.
Notes:
Routine Name
Routine Description
Calling Address
Stack Used
Data Block Format
1. The minimum data size is 2 bytes. The maximum data size is 15 bytes.
2. The start address must be a page boundary start address, e.g. $xx00 or $xx80.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
Monitor ROM (MON)
Table 10-17. EE_WRITE Routine
EE_WRITE
Emulated EEPROM write. Data size ranges from 2 to 15
bytes at a time.
$FC00
17 bytes
Bus speed (BUS_SPD)
Data size (DATASIZE)
Starting address (ADDRH)
Starting address (ADDRL)
Data 1
Data N
:
(1)
MC68HC908LJ24/LK24 — Rev. 2
(1)
(2)
MOTOROLA