PIC16F913-I/SP Microchip Technology Inc., PIC16F913-I/SP Datasheet - Page 206

• Manufacturer Part Number: PIC16F913-I/SP
• Description: 28 PIN, 7 KB FLASH, 352 RAM, 25 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F913-I/SP

• A/d Inputs: 5-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 5 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 25
• Interface: I2C/SPI/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 28-pin SPDIP
• Programmable Memory: 7K Bytes
• Ram Size: 256 Bytes
• Speed: 20 MHz
• Timers: 2-8-bit, 1-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC16F917/916/914/913
16.11 In-Circuit Debugger
The PIC16F917/916/914/913-ICD can be used in any
of the package types. The device will be mounted on
the target application board, which in turn has a 3 or 4
wire connection to the ICD tool.
When the debug bit in the Configuration Word
(CONFIG<12>) is programmed to a ‘0’, the In-Circuit
Debugger functionality is enabled. This function allows
simple debugging functions when used with MPLAB
ICD 2. When the microcontroller has this feature
enabled, some of the resources are not available for
general use. See Table 16-9 for more detail.
TABLE 16-9:
DS41250E-page 204
Legend: TTL = TTL input buffer, ST = Schmitt Trigger input buffer, P = Power, HV = High Voltage
PIC16F914/917 PIC16F913/916
Note: The user’s application must have the
11,32
12,31
40
39
1
circuitry
functionality. Once the ICD circuitry is
enabled, normal device pin functions on
RB6/ICSPCLK/ICDCK/SEG14
RB7/ICSPDAT/ICDDAT/SEG13 will not be
usable. The ICD circuitry uses these pins for
communication with the ICD2 external
debugger.
Pin (PDIP)
PIC16F917/916/914/913-ICD PIN DESCRIPTIONS
required
8,19
28
27
20
1
to
support
MCLR/V
ICDDATA
ICDCLK
Name
V
V
DD
SS
PP
ICD
and
Preliminary
®
Type
TTL
HV
ST
P
P
For more information, see “Using MPLAB
(DS51265),
(www.microchip.com).
16.11.1 ICD PINOUT
The devices in the PIC16F91X family carry the
circuitry for the In-Circuit Debugger on-chip and on
existing device pins. This eliminates the need for a
separate die or package for the ICD device. The pinout
for the ICD device is the same as the devices (see
Section 1.0 “Device Overview” for complete pinout
and pin descriptions). Table 16-9 shows the location
and function of the ICD related pins on the 28 and 40
pin devices.
Pull-up
—
—
—
—
—
In Circuit Debugger Bidirectional data
In Circuit Debugger Bidirectional clock
Programming voltage
available
© 2005 Microchip Technology Inc.
on
Description
Microchip’s
web
®
ICD 2”
site