EP3C16Q240C8N Altera, EP3C16Q240C8N Datasheet - Page 116

• Manufacturer Part Number: EP3C16Q240C8N
• Description: IC CYCLONE III FPGA 16K 240PQFP
• Manufacturer: Altera
• Series: Cyclone® IIIr

Specifications of EP3C16Q240C8N

• Number Of Logic Elements/cells: 15408
• Number Of Labs/clbs: 963
• Total Ram Bits: 516096
• Number Of I /o: 160
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 240-MQFP, 240-PQFP
• Family Name: Cyclone III
• Number Of Logic Blocks/elements: 15408
• # I/os (max): 92
• Frequency (max): 402MHz
• Process Technology: 65nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 15408
• Ram Bits: 516096
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: PQFP
• For Use With: 544-2601 - KIT DEV CYCLONE III LS EP3CLS200P0037 - BOARD DEV/EDUCATION ALTERA DE0544-2411 - KIT DEV NIOS II CYCLONE III ED.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-2458

6–16
I/O Banks
Figure 6–10. Cyclone III Device Family I/O Banks
Notes to
(1) This is a top view of the silicon die. This is only a graphical representation. For exact pin locations, refer to the pin list and the Quartus II software.
(2) True differential (PPDS, LVDS, mini-LVDS, and RSDS I/O standards) outputs are supported in row I/O banks 1, 2, 5, and 6 only. External resistors
(3) The LVPECL I/O standard is only supported on clock input pins. This I/O standard is not supported on output pins.
(4) The HSTL-12 Class II is supported in column I/O banks 3, 4, 7, and 8 only.
(5) The differential SSTL-18 and SSTL-2, differential HSTL-18, and HSTL-15 I/O standards are supported only on clock input pins and phase-locked
(6) The differential HSTL-12 I/O standard is only supported on clock input pins and PLL output clock pins. Differential HSTL-12 Class II is supported
(7) BLVDS output uses two single-ended outputs with the second output programmed as inverted. BLVDS input uses the LVDS input buffer.
Cyclone III Device Handbook, Volume 1
are needed for the differential outputs in column I/O banks.
loops (PLLs) output clock pins. Differential SSTL-18, differential HSTL-18, and HSTL-15 I/O standards do not support Class II output.
only in column I/O banks 3, 4, 7, and 8.
Figure
f
6–10:
For information about the Cyclone III device family differential PPDS, LVDS,
mini LVDS, RSDS I/O, and Bus LVDS (BLVDS) standard termination, refer to the
High-Speed Differential Interfaces in Cyclone III Devices
I/O pins on the Cyclone III device family are grouped together into I/O banks, and
each bank has a separate power bus. Cyclone III and Cyclone III LS devices have eight
I/O banks, as shown in
bank. All single-ended I/O standards are supported in all banks except HSTL-12
Class II, which is only supported in column I/O banks. All differential I/O standards
are supported in all banks. The only exception is HSTL-12 Class II, which is only
supported in column I/O banks.
I/O Bank 8
I/O Bank 3
(Note
Figure
All I/O Banks Support:
3.3-V LVTTL/LVCMOS
3.0-V LVTTL/LVCMOS
2.5-V LVTTL/LVCMOS
1.8-V LVTTL/LVCMOS
1.5-V LVCMOS
1.2-V LVCMOS
PPDS
LVDS
RSDS
mini-LVDS
Bus LVDS ( 7)
LVPECL (3)
SSTL-2 class I and II
SSTL-18 CLass I and II
HSTL-18 Class I and II
HSTL-15 Class I and II
HSTL-12 Class I and II (4)
Differential SSTL-2 (5)
Differential SSTL-18 (5)
Differential HSTL-18 (5)
Differential HSTL-15 (5)
Differential HSTL-12 (6)
1),
6–10. Each device I/O pin is associated with one I/O
(2)
I/O Bank 4
I/O Bank 7
Chapter 6: I/O Features in the Cyclone III Device Family
chapter.
© December 2009 Altera Corporation
I/O Banks