NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 92

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3-4-2 Initialization of the Memory Tables
Initializing Memory
Reference
Reference
It is possible to initialize the numeral memory table and character string memory
table in the NT30/30C. When these tables are initialized, the values are returned
to those set by the NT-series Support Tool.
When memory table initialization is executed in the maintenance mode, the
memory tables are initialized regardless of the resume function setting (see page
96).
Using the System Menu, initialize the memory tables by following the procedure
given below.
S The NT30/30C DIP switch SW2 pin 4 is used to enable/disable the screen data
S Regardless of whether initialization is executed or not, on completion of the
If OFF is set for the Resume Function memory switch, the memory tables can be
initialized just by switching the NT30/30C power OFF and back ON again, or by
resetting it (see page 96).
[ SYSTEM MENU ]
[ INITIALIZE MEMORY MENU ]
Maintenance Mode
[ MAINTENANCE MENU ]
Screen Memory
forced initialization. Setting this to ON selects enable initialization, and OFF to
disable it.
operation, switch DIP switch SW2 pin 4 OFF while the power to the NT30/30C
is OFF, then start up the NT30/30C again.
Display History
Transmit Mode
Memory Table
Init. Memory
History Data
PT Settings
I/O Check
Quit
Quit
Quit
Memory Switch
Select “Maintenance Mode.”
Select “Init. Memory.”
Select “Memory Table.”
Section
3-4
81