NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 75

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2-8
Connecting a Printer
Connecting a Printer
ON
1
S RS-232C/RS-422A Link Adapter (NT-AL001)
Hard copies of screens can be printed (printing of screen images) onto a printer
connected to the NT30/30C.
In order to make a hard copy at a printer connected to the NT30/30C, it is neces-
sary either to create a screen print key as a touch switch on the screen to be
printed during screen creation, or to issue a print instruction from the PC. For de-
tails, see 4-7 Touch Switches (page 154), and 5-7 NT30/30C Status Control
(page 239).
When using the NT30/30C in a 1:1 RS-422A connection, make the following DIP
switch settings at the RS-232C/RS-422 Link Adapter (NT-AL001) used for relay
purposes.
2
3
4
5
6
Serial Communications Board
(Inner Board slot 1)
2-wire or 4-wire Switch
Set to 4 (right position).
Terminating Resistance Switch
Set to ON (right position).
Setting for built-in terminal resistor
(DIP switch pin 2)
Set pin 2 to ON.
(This sets the built-in terminal resistor).
2-wire/4-wire selection
(DIP switch pins 3 and 4)
Set both pin 3 and 4 to OFF.
(This sets a 4-wire connection.).
RS-422A transmission mode selection
(DIP switch pins 5 and 6)
Set pin 5 to OFF and pin 6 to ON.
(This sets RS control to RS-232C.)
Section
2-8
63