NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 72

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

60
Connection to a PC by the NT Link
C200HX/HG/HE(-Z)
With the C200HX/HG/HE(-Z), CQM1, and CQM1H, in order that the PC Setup
settings (data memory) are enabled, set the DIP switch on the front panel in the
way shown below.
DIP Switch Setting for C200HX/HG/HE(-Z), CQM1, CQM1H
DIP Switch Setting for CPM2A
With the CPM2A, in order that the PC Setup settings (data memory) are
enabled, set the DIP switch on the front panel in the way shown below.
DIP Switch Setting for CPM2C
With the CPM2C, in order that the PC Setup settings (data memory) are
enabled, set the DIP switches on the front panel in the way described below.
RS-232C Port Communications Conditions Setting
Set SW5 to OFF to enable the settings made in PC Setup.
Set the DIP switch according to the way the peripheral port
and the RS-232C port are used.
• If (1) the PT is connected to the peripheral port or (2) the PT is connected to the
• If the PT is connected to the RS-232C port and a Programming Console is
RS-232C port and a device that requires communications settings other than
the standard settings is connected to the peripheral port, set the DIP switches
in the way shown below.
connected to the peripheral port, set the DIP switches in the way shown below.
CQM1
Set SW1 to OFF.
Set SW2 to ON.
Set SW1 to OFF.
Set SW2 to OFF.
CQM1H
Set the communications
setting switch to OFF
(down position).
Section
2-7