NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 42

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

30
Connection to a PC by Host Link via RS-232C
5V supply
I/O port
Synchronization
Terminator
CTS
ON
OFF
RS-422A
RS-232C
Internal
External
OFF
ON
0V
External
S C500/C1000H Rack-mounting Host Link Unit: C500-LK203
S CPU-mounting Host Link Unit: C120-LK201-V1
Setting the Rear Switches
S Unit #, parity, and transfer code (DIP switch SW1 pins 1 to 5)
S Baud rate (DIP switch SW2 pins 1 to 4)
S 1-to-1/1-to-N selection (DIP switch SW2 pin 6)
S Command level (DIP switch SW2 pins 7 and 8)
S CTS selection (DIP switch SW3 pins 1 and 2)
S Synchronization (DIP switch SW3 pins 3 to 6)
Set SW1 pins 1 to 5 to OFF (0).
* Parity is fixed at Even Parity. Transfer code is fixed at
Set these pins to 1010 to select 9,600 bps.
Set these pins to 0010 to select 19,200 bps.
Set pin 6 to OFF (0) (1-to-N).
Set these pins to ON (1).
(Levels 1, 2, and 3 are enabled.)
Set pin 1 to ON (1) and pin 2 to OFF (0). (Set this al-
ways to 0V.)
Set pins 3, 5, and 6 to ON (1), and pin 4 to OFF (0).
(Set these to Internal synchronization.)
S I/O port selection (selector switch)
S Unit #, parity, and transfer code (DIP switch SW1 pins
S Synchronization (selector switch)
S Baud rate (DIP switch SW1 pins 1 to 4)
S 1-to-1/1-to-N selection (DIP switch SW2 pin 6)
S Command level (DIP switch SW2 pins 7 and 8)
S CTS selection (selector switch)
ASCII 7 data bits and 2 stop bits.
Set this to RS-232C.
1 to 7)
Set pins 1 to 7 to OFF (0).
Set this to internal synchronization.
Set these pins to 1010 to select 9,600 bps.
Set these pins to 0010 to select 19,200 bps.
Set pin 6 to OFF (0) (1-to-N).
Set these pins to ON (1).
(Levels 1, 2, and 3 are enabled.)
Set this always to 0V (ON).
(0: OFF, 1: ON)
(0: OFF, 1: ON)
Section
2-5