NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 181

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4-8-6 Setting Items for Numeral Setting
Items to be Set
Restrictions and Additions when Creating the Thumb Wheel Type
170
Numeral Setting
For the numeral setting, the following items are set when being created with the
NT-series Support Tool. However, for numeral setting of thumb wheel type, there
are some restrictions on the setting of several items.
S Numeral Memory Table Entry To Access
S Number of Digits of Numeric Value Entered
S Upper/Lower Limit
S Display Attribute
For numeral setting for thumb wheel type, there are the following restrictions and
additions when setting the items.
S Number of Digits of Positive Numbers To Be Entered with a Sign Dis-
S Display Size
S Shape (End Plate)
The number of the numeral memory table entry is specified to register the nu-
meric values entered for the numeral setting.
The number of digits of numeric value entered is specified. Up to 8-digit can be
specified by figuring out a sum of the number of digits of both integer part and
decimal fraction. However, when displaying a sign, the number of negative
numbers is limited to a maximum of 7-digit.
Upper limit and lower limit are set separately. A maximum of 8-digit numeric
value (up to 7-digit for negative numbers) can be set.
When the upper limit value or lower limit value is negative, set F as the eighth
digit.
Example: When the upper limit value or lower limit value is --123, set
F0000123.
The same attributes as the numeral display are set. For details, refer to the Nu-
merals that Can Be Displayed (page 139).
played
For the thumb wheel type, with a sign displayed, the maximum number for the
total number of digits in the integral portion and the decimal portion of positive
numbers to be entered is 7.
There are only three kinds of size that can be specified. Size is specified by the
touch switch size of the increment/decrement (+, --) keys. Display size is se-
lected out of three size: minimum unit of touch switch (20 dots by 20 dots), 1 x 1
(small), 2 x 2 (medium), 3 x 3 (large). Entire size of the numeral setting input
column is specified by the touch switch size just specified.
Either of the two kinds of shape as shown below can be set. Decoration (end
plate) at both ends of the numeral setting input column differs.
1 2 3 4 5 6 7 8
With End Plate
1 2 3 4 5 6 7 8
Without End Late
Section
4-8