NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 61

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Connection to a PC by Host Link via RS-422A
I/O port
Synchronization
Termination
resistance
CTS
RS-422A
RS-232C
Internal
External
OFF
ON
0V
External
Unavailable
selector
External
(OFF)
switch
(ON)
CTS
C200H-LK202-V1
This Unit has an RS-422A connector.
S C500/C1000H Rack-mounting Host Link Units: C500-LK201-V1 and
Setting the Front Switches
Setting the Rear Switches
C500-LK203
- C500-LK201-V1
- C500-LK201-V1
Set the control mode to the Host Link mode. (page NO TAG)
S
S Unit # (DIP switch SW1)
S Synchronization (selector switch)
S Baud rate (DIP switch SW2 pins 1 to 4)
S 1-to-1/1-to-N selection (DIP switch SW2 pin 6)
S Command level (DIP switch SW2 pins 7 and 8)
S CTS selection (selector switch)
S I/O port selection (selector switch)
Terminator setting (selector switch)
When using an RS-422A cable, set this to ON.
Note: Set the Link Adapter to ON also.
Set pins 1 to 5 to OFF (0).
Set this to internal synchronization.
Set these pins to 1010 to select 9,600 bps.
Set these pins to 0010 to select 19,200 bps.
Set pin 6 to OFF (0) (1-to-N).
Set these pins to ON (1).
(Levels 1, 2, and 3 are enabled.)
Set this always to 0V (ON).
protocol
protocol
- If connecting to an RS-232C connector, set this to RS-232C.
-
1--to--N
1--to--1
(OFF)
(ON)
I
f connecting to an RS-422A connector, set this to RS-422A.
S Terminator setting (selector switch)
S 1-to-1/1-to-N protocol selection (selector switch)
Set this switch to ON.
Note: Set the link adapter to ON also.
Set this switch to 1-to-N (OFF)
(0: OFF, 1: ON)
Section
2-6
49