NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 67

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Connection to a PC by Host Link via RS-422A
Connecting the NT30/30C to a C-series CPM2C
The CPM2C has only one connector, which is the same shape as the CS1-series
peripheral port. The signals in this connector, however, are divided internally into
those for the RS-232C port and those for the peripheral port. Therefore, when
using the CPM2C, connect to the peripheral port in the way shown below
according to the Connecting Cable and ports used. For details, refer to the
CPM2C Operation Manual (W356).
Switch Settings for a Communications Board on a C200HX/HG/HE(-Z) PC
Set the switches for a Communications Board on a C200HX/HG/HE(-Z) PC in
the following way:
Switch Settings for a Serial Communications Board on a CQM1H PC
Set the switches for a Serial Communications Board on a CQM1H PC in the fol-
lowing way:
Switch Settings for the RS-422A Adapter
S Set the terminal resistance
switch to ON (upper position).
Peripheral port
RS-232C port
(D-sub, 9-pin, female)
2-wire or 4-wire switch (WIRE): 4 4 (4-wire = RS-422A)
Terminating resistance switch (TERM): ON (terminator ON = terminating
resistance enabled)
Switch 1: 4 4 (4-wire = RS-422A)
Switch 2: ON (terminator ON = terminating resistance enabled)
CPM2C-CN111
Serial Communications Board
(Inner Board slot 1)
Terminating Resistance Switch
Set to ON (right position).
2-wire or 4-wire Switch
Set to 4 (right position).
CPM2C
Peripheral port
CS1W-CN114
CPM1
-CIF11
CPM1
CPM2C
Section
2-6
55