NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 91

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Initialization by Using the DIP Switch (Forced Initialization)
80
Initializing Memory
Note
Operation 1
Upon completion of the screen data memory initialization, the NT30/30C returns
to the Initialize Memory Menu.
After the screen data memory has been initialized, if an attempt is made to set the
NT30/30C to the RUN mode before screen data has been transferred from the
NT-series Support Tool, the error message “No direct information is set!!” will be
displayed.
Set the DIP switch as follows to initialize the screen data memory.
2
3
Be sure to turn the power OFF before setting the NT30/30C DIP switch.
• If no is selected, the memory initialization will be canceled and the NT30/30C
• If no is selected, the memory will not be initialized.
Initialize Screen Memory?
Initialize Screen Memory?
returns to the Initialize Memory Menu.
Set DIP switch SW2 pin 4 on the NT30/30C to ON and turn the power ON.
Turn the NT30/30C power to OFF.
Set NT30/30C DIP switch SW2 pin 4 to OFF and turn the power ON.
Screen Memory Initialized
Yes
Yes
Turn OFF the DIP
switch 2-4 and push
the Reset switch, then
return to RUN mode.
No
No
Select “Yes.”
The screen data memory is ini-
tialized. During the initializa-
tion, the “Initializing” message
will be displayed.
Select “Yes.” The screen data
memory is initialized. During
the initialization, the “Initializ-
ing” message will be dis-
played.
Section
3-4