NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 74

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

62
Connection to a PC by the NT Link
RS-422A
I/O port
selector
switch
RS-232C
*1
*2
S C-series C200HX/HG/HE(-Z) or CQM1H
Setting the Front Switches
PC Setup Settings
There are no particular settings required in the PC Setup for connecting to a
CVM1/CV-series CPU Unit via NT Link (1:1).
PC Setup Settings
Write the settings directly from the Programming Device (e.g., CX-Programmer)
to the PC Setup (data memory) according to the model of the host used.
For details of PC Setup operations, refer to the manual for the PC used.
Switch Settings for a Communications Board on a C200HX/HG/HE(-Z) PC
Set the switches for a Communications Board on a C200HX/HG/HE(-Z) PC in
the following way:
Switch Settings for a Serial Communications Board on a CQM1H PC
Set the switches for a Serial Communications Board on a CQM1H PC in the fol-
lowing way:
Port A of C200HX/HG/HE(-Z)
(See note 1.)
Port 2 of CQM1H
(See note 2.)
RS-422A port of Communications Board.
RS-422A port of Serial Communications Board.
2-wire or 4-wire switch (WIRE): 4 4 (4-wire = RS-422A)
Terminating resistance switch (TERM): ON (terminator ON = terminating
resistance enabled)
Switch 1: 4 4 (4-wire = RS-422A)
Switch 2: ON (terminator ON = terminating resistance enabled)
S Communications method (DIP switch pin 3)
S Terminator setting (DIP switch pin 6)
S Host Link communications method (selector switch)
Set pin 3 to ON (NT Link).
Set pin 6 to ON (terminating resistance enabled).
- Set to RS-422A.
Host
DM6555
DM6550
Word
Setting
4000
4000
Section
Setting Con-
NT Link is
used.
tents
sed
2-7