UPD78F0413GA-GAM-AX NEC, UPD78F0413GA-GAM-AX Datasheet - Page 359

• Manufacturer Part Number: UPD78F0413GA-GAM-AX
• Description: 8BIT UC, 32K FLASH, 1KB RAM, LCD
• Manufacturer: NEC

Specifications of UPD78F0413GA-GAM-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 30
• Ram Memory Size: 1024Byte
• Cpu Speed: 10MHz
• No. Of Timers: 8
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 32KB
• Oscillator Type: External, Internal

1. Stop bit length: 1
2. Stop bit length: 2
(c) Normal transmission
When bit 7 (POWER6) of asynchronous serial interface operation mode register 6 (ASIM6) is set to 1 and bit
6 (TXE6) of ASIM6 is then set to 1, transmission is enabled. Transmission can be started by writing transmit
data to transmit buffer register 6 (TXB6). The start bit, parity bit, and stop bit are automatically appended to
the data.
When transmission is started, the data in TXB6 is transferred to transmit shift register 6 (TXS6). After that,
the transmit data is sequentially output from TXS6 to the T
parity and stop bits set by ASIM6 are appended and a transmission completion interrupt request (INTST6) is
generated.
Transmission is stopped until the data to be transmitted next is written to TXB6.
Figure 14-17 shows the timing of the transmission completion interrupt request (INTST6). This interrupt
occurs as soon as the last stop bit has been output.
T
T
X
X
D6 (output)
D6 (output)
INTST6
INTST6
Figure 14-17. Normal Transmission Completion Interrupt Request Timing
Start
Start
CHAPTER 14 SERIAL INTERFACE UART6
D0
D0
User’s Manual U18698EJ1V0UD
D1
D1
D2
D2
X
D6 pin. When transmission is completed, the
D6
D6
D7
D7
Parity
Parity
Stop
Stop
359