UPD78F0413GA-GAM-AX NEC, UPD78F0413GA-GAM-AX Datasheet - Page 302

• Manufacturer Part Number: UPD78F0413GA-GAM-AX
• Description: 8BIT UC, 32K FLASH, 1KB RAM, LCD
• Manufacturer: NEC

Specifications of UPD78F0413GA-GAM-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 30
• Ram Memory Size: 1024Byte
• Cpu Speed: 10MHz
• No. Of Timers: 8
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 32KB
• Oscillator Type: External, Internal

12.4 10-Bit Successive Approximation Type A/D Converter Operations
12.4.1 Basic operations of A/D converter
302
<1> Set bit 0 (ADCE) of the A/D converter mode register (ADM) to 1 to start the operation of the comparator.
<2> Set channels for A/D conversion to analog input by using the A/D port configuration register (ADPC0) and set
<3> Set A/D conversion time by using bits 6 to 1 (FR3 to FR0, LV1, and LV0) of ADM.
<4> Select one channel for A/D conversion using the analog input channel specification register (ADS).
<5> Start the conversion operation by setting bit 7 (ADCS) of ADM to 1.
<6> The voltage input to the selected analog input channel is sampled by the sample & hold circuit.
<7> When sampling has been done for a certain time, the sample & hold circuit is placed in the hold state and the
<8> Bit 9 of the successive approximation register (SAR) is set. The series resistor string voltage tap is set to
<9> The voltage difference between the series resistor string voltage tap and sampled voltage is compared by the
<10> Next, bit 8 of SAR is automatically set to 1, and the operation proceeds to the next comparison. The series
<11> Comparison is continued in this way up to bit 0 of SAR.
<12> Upon completion of the comparison of 10 bits, an effective digital result value remains in SAR, and the result
<13> Repeat steps <6> to <12>, until ADCS is cleared to 0.
Caution Make sure the period of <1> to <5> is 1 s or more.
Remark Two types of A/D conversion result registers are available.
to input mode by using port mode register 2 (PM2).
(<6> to <12> are operations performed by hardware.)
sampled voltage is held until the A/D conversion operation has ended.
(1/2) AV
voltage comparator. If the analog input is greater than (1/2) AV
analog input is smaller than (1/2) AV
resistor string voltage tap is selected according to the preset value of bit 9, as described below.
The voltage tap and sampled voltage are compared and bit 8 of SAR is manipulated as follows.
value is transferred to the A/D conversion result register (ADCR, ADCRH) and then latched.
At the same time, the A/D conversion end interrupt request (INTAD) can also be generated.
To stop the A/D converter, clear ADCS to 0.
To restart A/D conversion from the status of ADCE = 1, start from <5>. To start A/D conversion again when
ADCE = 0, set ADCE to 1, wait for 1 s or longer, and start <5>. To change a channel of A/D conversion,
start from <4>.
CHAPTER 12 10-BIT SUCCESSIVE APPROXIMATION TYPE A/D CONVERTER ( PD78F041x only)
Bit 9 = 1: (3/4) AV
Bit 9 = 0: (1/4) AV
Analog input voltage
Analog input voltage < Voltage tap: Bit 8 = 0
ADCR (16 bits): Store 10-bit A/D conversion value
ADCRH (8 bits): Store 8-bit A/D conversion value
REF
by the tap selector.
REF
REF
Voltage tap: Bit 8 = 1
REF
User’s Manual U18698EJ1V0UD
, the MSB is reset to 0.
REF
, the MSB of SAR remains set to 1. If the