ATA5771-DK1 Atmel, ATA5771-DK1 Datasheet - Page 35

• Manufacturer Part Number: ATA5771-DK1
• Description: BOARD XMITTER FOR ATA5771 868MHZ
• Manufacturer: Atmel
• Type: Transmitterr

Specifications of ATA5771-DK1

• Frequency: 868MHz
• Maximum Frequency: 868 MHz
• Supply Voltage (max): 4 V
• Supply Voltage (min): 2 V
• Supply Current: 8.5 mA
• Product: RF Development Tools
• For Use With/related Products: ATA5771
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.9.5
9137E–RKE–12/10
Low-frequency Crystal Oscillator
Table 4-6.
Notes:
To use a 32.768 kHz watch crystal as the clock source for the device, the low-frequency crys-
tal oscillator must be selected by setting CKSEL fuses to ‘0110’. The crystal should be
connected as shown in
Note for details on oscillator operation and how to choose appropriate values for C1 and C2.
When this oscillator is selected, start-up times are determined by the SUT fuses as shown in
Table
Table 4-7.
Notes:
SUT1..0
CKSEL0
00
01
10
11
0
0
0
0
1
1
1
1
4-7.
1. These options should only be used when not operating close to the maximum frequency of
2. These options are intended for use with ceramic resonators and will ensure frequency stabil-
1. These options should only be used if frequency stability at start-up is not important for the
the device, and only if frequency stability at start-up is not important for the application.
These options are not suitable for crystals.
ity at start-up. They can also be used with crystals when not operating close to the maximum
frequency of the device, and if frequency stability at start-up is not important for the
application.
application.
Start-up Time from Power
Down and Power Save
SUT1..0
Start-up Times for the Crystal Oscillator Clock Selection
Start-up Times for the Low Frequency Crystal Oscillator Clock Selection
00
01
10
11
00
01
10
11
1K CK
1K CK
32K CK
Figure 4-11 on page
Start-up Time from
(1)
(1)
Power-down and
Power-save
258 CK
258 CK
1K CK
1K CK
1K CK
16K CK
16K CK
16K CK
(2)
(2)
(2)
(1)
(1)
Additional Delay from
Reset (V
34. See the 32 kHz Crystal Oscillator Application
64 ms
64 ms
4 ms
Reserved
Additional Delay
CC
14CK + 4.1 ms
14CK + 4.1 ms
14CK + 4.1 ms
14CK + 65 ms
14CK + 65 ms
14CK + 65 ms
(V
from Reset
= 5.0V)
Atmel ATA5771/73/74
CC
14CK
14CK
= 5.0V)
Recommended usage
Fast rising power or BOD
enabled
Slowly rising power
Stable frequency at start-up
Recommended Usage
Ceramic resonator, fast
rising power
Ceramic resonator,
slowly rising power
Ceramic resonator, BOD
enabled
Ceramic resonator, fast
rising power
Ceramic resonator,
slowly rising power
Crystal Oscillator, BOD
enabled
Crystal Oscillator, fast
rising power
Crystal Oscillator, slowly
rising power
35