ATA5771-DK1 Atmel, ATA5771-DK1 Datasheet - Page 171

• Manufacturer Part Number: ATA5771-DK1
• Description: BOARD XMITTER FOR ATA5771 868MHZ
• Manufacturer: Atmel
• Type: Transmitterr

Specifications of ATA5771-DK1

• Frequency: 868MHz
• Maximum Frequency: 868 MHz
• Supply Voltage (max): 4 V
• Supply Voltage (min): 2 V
• Supply Current: 8.5 mA
• Product: RF Development Tools
• For Use With/related Products: ATA5771
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9137E–RKE–12/10
5. A: The EEPROM array is programmed one byte at a time by supplying the address and
6. Any memory location can be verified by using the Read instruction which returns the
7. At the end of the programming session, RESET can be set high to commence normal
8. Power-off sequence (if needed):
Table 4-65.
data together with the appropriate Write instruction. An EEPROM memory location is
first automatically erased before new data is written. If polling (RDY/BSY) is not used,
the user must wait at least t
page
grammed.
B: The EEPROM array is programmed one page at a time. The Memory page is
loaded one byte at a time by supplying the 2 LSB of the address and data together with
the Load EEPROM Memory Page instruction. The EEPROM Memory Page is stored
by loading the Write EEPROM Memory Page Instruction with the 4 MSB of the
address. When using EEPROM page access only byte locations loaded with the Load
EEPROM Memory Page instruction is altered. The remaining locations remain
unchanged. If polling (RDY/BSY) is not used, the used must wait at least t
before issuing the next page (See
0xFF in the data file(s) need to be programmed.
content at the selected address at serial output MISO.
operation.
Set RESET to “1”.
Turn V
171.) In a chip erased device, no 0xFFs in the data file(s) need to be pro-
CC
t
WD_EEPROM
t
t
power off.
t
Symbol
WD_ERASE
WD_FLASH
WD_FUSE
Minimum Wait Delay Before Writing the Next Flash or EEPROM Location
WD_EEPROM
Table 4-65 on page
before issuing the next byte. (See
Atmel ATA5771/73/74
Minimum Wait Delay
171). In a chip erased device, no
4.5 ms
4.0 ms
4.0 ms
4.5 ms
Table 4-65 on
WD_EEPROM
171