MMC2107CFCAG33 Freescale Semiconductor, MMC2107CFCAG33 Datasheet - Page 126

• Manufacturer Part Number: MMC2107CFCAG33
• Description: IC MCU 33MHZ 128K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2107CFCAG33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: MMC2107
• Core: M-CORE
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 72
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Cpu Family: Mcore
• Device Core: MCORE
• Device Core Size: 32b
• Frequency (max): 33MHz
• Total Internal Ram Size: 8KB
• # I/os (max): 72
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 3.6/5.5V
• Operating Supply Voltage (min): 2.7/4.5V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Signal Description
4.5.6.2 Transmit Data (TXD1 and TXD2)
4.5.7 Timer Signals (ICOC1[3:0] and ICOC2[3:0])
4.5.8 Analog-to-Digital Converter Signals
4.5.8.1 Analog Inputs (PQA[4:3], PQA[1:0], and PQB[3:0])
4.5.8.2 Analog Reference (V
4.5.8.3 Analog Supply (V
4.5.8.4 Positive Supply (V
Technical Data
126
These signals are used for the SCI transmitter data output and are also
available for GPIO when not configured for transmitter operation.
These signals provide the external interface to the timer functions. They
may be configured as general-purpose I/O if the timer output function is
not needed. The default state at reset is general-purpose input.
These signals are used by the analog-to-digital converter (QADC)
module.
These signals provide the analog inputs to the QADC. The PQA signals
may also be used as general-purpose digital I/O. The PQB signals may
also be used as general-purpose digital inputs.
These signals serve as the high (V
for the analog converter.
These dedicated power supply signals isolate the sensitive analog
circuitry from the normal levels of noise present on the digital power
supply.
This signal supplies positive power to the ESD structures in the QADC
pads.
DDA
DDH
Freescale Semiconductor, Inc.
For More Information On This Product,
RH
and V
)
and V
SSA
Go to: www.freescale.com
RL
)
Signal Description
)
RH
) and low (V
RL
) reference potentials
MMC2107 – Rev. 2.0
MOTOROLA