DF2378BVFQ35WV Renesas Electronics America, DF2378BVFQ35WV Datasheet - Page 828

• Manufacturer Part Number: DF2378BVFQ35WV
• Description: IC H8S/2378 MCU FLASH 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2378BVFQ35WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 35MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 97
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-QFP
• For Use With: EDK2378 - DEV EVAL KIT FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 15 Serial Communication Interface (SCI, IrDA)
In the specification, the high pulse width is fixed at a minimum of 1.41 µs, and a maximum of
(3/16 + 2.5%) × bit rate or (3/16 × bit rate) + 1.08 µs. When system clock φ is 20 MHz, 1.6 µs can
be set for a high pulse width with a minimum value of 1.41 µs.
When the serial data is 1, no pulse is output.
Reception: In reception, IR frame data is converted to a UART frame by the IrDA interface, and
input to the SCI.
When a high pulse is detected, 0 data is output, and if there is no pulse during a one-bit interval, 1
data is output. Note that a pulse shorter than the minimum pulse width of 1.41 µs will be identified
as a 0 signal.
High Pulse Width Selection: Table 15.12 shows possible settings for bits IrCKS2 to IrCKS0
(minimum pulse width), and operating frequencies of this LSI and bit rates, for making the pulse
width shorter than 3/16 times the bit rate in transmission.
Rev.7.00 Mar. 18, 2009 page 760 of 1136
REJ09B0109-0700
Start
Start
cycle
bit
bit
Bit
0
Transmit
0
Figure 15.34 IrDA Transmit/Receive Operations
1
1
0
0
UART frame
IR frame
1
1
0
0
Data
Data
0
0
Receive
1
1
Pulse width
1.6 μs to 3/16 bit cycle
1
1
0
0
Stop
Stop
bit
bit
1
1