DF2378BVFQ35WV Renesas Electronics America, DF2378BVFQ35WV Datasheet - Page 367

• Manufacturer Part Number: DF2378BVFQ35WV
• Description: IC H8S/2378 MCU FLASH 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2378BVFQ35WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 35MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 97
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-QFP
• For Use With: EDK2378 - DEV EVAL KIT FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

• DMABCRL
Bit
7
Bit Name
DTME1
Initial Value
0
R/W
R/W
Description
Data Transfer Master Enable 1
Together with the DTE1 bit, this bit controls
enabling or disabling of data transfer on channel 1.
When both the DTME1 bit and DTE1 bit are set to
1, transfer is enabled for channel 1.
If channel 1 is in the middle of a burst mode
transfer when an NMI interrupt is generated, the
DTME1 bit is cleared, the transfer is interrupted,
and bus mastership passes to the CPU. When the
DTME1 bit is subsequently set to 1 again, the
interrupted transfer is resumed. In block transfer
mode, however, the DTME1 bit is not cleared by an
NMI interrupt, and transfer is not interrupted.
[Clearing conditions]
•
•
•
[Setting condition]
When 1 is written to DTME1 after reading DTME1 =
0
When initialization is performed
When NMI is input in burst mode
When 0 is written to the DTME1 bit
Rev.7.00 Mar. 18, 2009 page 299 of 1136
Section 7 DMA Controller (DMAC)
REJ09B0109-0700