SAK-C505CA-4EM CA Infineon Technologies, SAK-C505CA-4EM CA Datasheet - Page 57

• Manufacturer Part Number: SAK-C505CA-4EM CA
• Description: IC MCU 8BIT 32KB OTP MQFP-44-2
• Manufacturer: Infineon Technologies
• Series: C5xx/C8xxr

Specifications of SAK-C505CA-4EM CA

• Core Processor: C500
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: CAN, EBI/EMI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: OTP
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 4.25 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 44-BQFP
• Data Bus Width: 8 bit
• Data Ram Size: 1.25 KB
• Interface Type: CAN, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 34
• Number Of Timers: 3
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Packages: PG-MQFP-44
• Max Clock Frequency: 20.0 MHz
• Sram (incl. Cache): 1.25 KByte
• Can Nodes: 1
• A / D Input Lines (incl. Fadc): 8
• Program Memory: 32.0 KByte
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: K505CA4EMCANP; K505CA4EMCAXT; SAK-C505CA-4EMCA; SAK-C505CA-4EMCAINTR; SAK-C505CA-4EMCATR; SAK-C505CA-4EMCATR; SAKC505CA4EMCAXT; SP000106397

Table 11
Pin Definitions and Functions in Programming Mode (cont’d)
Symbol
P2.0-7
PSEN
PROG
EA/V
D7-0
N.C.
*) I = Input
Data Sheet
O = Output
PP
Pin Number
18-25
26
27
29
30-37
1-3, 6, 11-13,
28, 38-44
I/O
*)
I
I
I
–
I/O
–
Function
Address lines
P2.0-7 are used as multiplexed address input lines A0-A7 and
A8-A14. A8-A14 must be latched with PALE.
Program store enable
This input must be at static “0“ level during the whole
programming mode.
Programming mode write strobe
This input is used in programming mode as a write strobe for
OTP memory program, and lock bit write operations During
basic programming mode selection a low level must be applied
to PROG.
External Access / Programming voltage
This pin must be at 11.5V (V
programming of an OTP memory byte or lock bit. During an
OTP memory read operation this pin must be at V
This pin is also used for basic programming mode selection. At
basic programming mode selection a low level must be applied
to EA/V
Data lines 0-7
During programming mode, data bytes are transferred via the
bidirectional port 0 data lines.
Not Connected
These pins should not be connected in programming mode.
PP
.
53
C505/C505C/C505A/C505CA
PP
) voltage level during
IH
high level.
12.00