C8051F930DK Silicon Laboratories Inc, C8051F930DK Datasheet - Page 148

• Manufacturer Part Number: C8051F930DK
• Description: KIT DEV C8051F920,F921,F930,F931
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F930DK

• Contents: Target Board, Power Adapter, USB Debug Adapter, Cables, Batteries, and Software
• Processor To Be Evaluated: C8051F930
• Processor Series: C8051F9xx
• Data Bus Width: 8 bit
• Interface Type: I2C, UART, SPI
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 0.9 V to 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: C8051F920, F921, F930, F931
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1473

C8051F93x-C8051F92x
The level of Flash security depends on the Flash access method. The three Flash access methods that
can be restricted are reads, writes, and erases from the C2 debug interface, user firmware executing on
unlocked pages, and user firmware executing on locked pages. Table 13.1 summarizes the Flash security
features of the C8051F93x-C8051F92x devices.
148
Read, Write or Erase unlocked pages
(except page with Lock Byte)
Read, Write or Erase locked pages
(except page with Lock Byte)
Read or Write page containing Lock Byte
(if no pages are locked)
Read or Write page containing Lock Byte
(if any page is locked)
Read contents of Lock Byte 
(if no pages are locked)
Read contents of Lock Byte 
(if any page is locked)
Erase page containing Lock Byte
(if no pages are locked)
Erase page containing Lock Byte - Unlock all pages
(if any page is locked)
Lock additional pages
(change 1s to 0s in the Lock Byte)
Unlock individual pages 
(change 0s to 1s in the Lock Byte)
Read, Write or Erase Reserved Area

C2DE—C2 Device Erase (Erases all Flash pages including the page containing the Lock Byte)
FEDR—Not permitted; Causes Flash Error Device Reset (FERROR bit in RSTSRC is '1' after reset) 
- All prohibited operations that are performed via the C2 interface are ignored (do not cause device reset).
- Locking any Flash page also locks the page containing the Lock Byte.
- Once written to, the Lock Byte cannot be modified except by performing a C2 Device Erase.
- If user code writes to the Lock Byte, the Lock does not take effect until the next device reset.
- The scratchpad is locked when all other Flash pages are locked.
- The scratchpad is erased when a Flash Device Erase command is performed.
Action
Table 13.1. Flash Security Summary
Rev. 1.1
Only by C2DE
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Not Permitted
C2 Debug
Permitted
Permitted
Permitted
Permitted
Interface
an unlocked page a locked page
User Firmware executing from:
Permitted
Permitted
Permitted
FEDR
FEDR
FEDR
FEDR
FEDR
FEDR
FEDR
FEDR
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
FEDR
FEDR
FEDR
FEDR
FEDR