HW-SPAR3E-SK-UK-G Xilinx Inc, HW-SPAR3E-SK-UK-G Datasheet - Page 97

• Manufacturer Part Number: HW-SPAR3E-SK-UK-G
• Description: KIT STARTER SPARTAN-3E
• Manufacturer: Xilinx Inc

Specifications of HW-SPAR3E-SK-UK-G

• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Development Tool Type: Hardware / Software - Starter Kit
• Mcu Supported Families: Spartan-3E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: HW-SPAR3E-SK-US-UK-G; HW-SPAR3E-SK-US-UK-G

Spartan-3E FPGA Starter Kit Board User Guide
UG230 (v1.2) January 20, 2011
Downloading the Design to SPI Flash
R
To generate the actual PROM file, click Operations  Generate File as shown in
Figure
As shown in
successfully created. The PROM Formatter creates an output file based on the settings
shown in
There are multiple methods to program the SPI Flash, as listed below.
•
•
Figure 12-13: Click Operations  Generate File to Create the Formatted PROM File
Use the Xilinx iMPACT programming support.
Use the PicoBlaze based SPI Flash programmer reference designs. Use a terminal
emulator, such as Hyperlink, to download SPI Flash programming data via the PC’s
serial port to the FPGA. The embedded PicoBlaze processor then programs the
attached SPI serial Flash. See
12-13.
Figure
Figure
12-8. In this example, the output file is called MySPIFlash.mcs.
Figure 12-14: PROM File Formatter Succeeded
12-14, the iMPACT software indicates that the PROM file was
www.xilinx.com
“Related Resources,” page
Configuring from SPI Flash
103.
UG230_c15_12_030206
UG230_c15_13_030206
97