HW-SPAR3E-SK-UK-G Xilinx Inc, HW-SPAR3E-SK-UK-G Datasheet - Page 31

• Manufacturer Part Number: HW-SPAR3E-SK-UK-G
• Description: KIT STARTER SPARTAN-3E
• Manufacturer: Xilinx Inc

Specifications of HW-SPAR3E-SK-UK-G

• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Development Tool Type: Hardware / Software - Starter Kit
• Mcu Supported Families: Spartan-3E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: HW-SPAR3E-SK-US-UK-G; HW-SPAR3E-SK-US-UK-G

Spartan-3E FPGA Starter Kit Board User Guide
UG230 (v1.2) January 20, 2011
R
If the original FPGA configuration file used the default StartUp clock source, CCLK,
iMPACT issues the warning message shown in
ignored. When downloading via JTAG, the iMPACT software must change the StartUP
clock source to use the TCK JTAG clock source.
To start programming the FPGA, right-click the FPGA and select Program. The iMPACT
software reports status during programming process. Direct programming to the FPGA
takes a few seconds to less than a minute, depending on the speed of the PC’s USB port and
the iMPACT settings.
When the FPGA successfully programs, the iMPACT software indicates success, as shown
in
(see
Figure
Figure
Figure 4-7: iMPACT Issues a Warning if the StartUp Clock Was Not CCLK
4-9. The FPGA application is now executing on the board and the DONE pin LED
4-2) lights up.
Figure 4-8: Right-Click to Program the Spartan-3E FPGA
Programming the FPGA, CPLD, or Platform Flash PROM via USB
www.xilinx.com
Figure
4-7. This message can be safely
UG230_c4_09_022406
UG230_c4_08_022406
31