ATtiny26 Atmel Corporation, ATtiny26 Datasheet - Page 94

• Manufacturer Part Number: ATtiny26
• Manufacturer: Atmel Corporation

Specifications of ATtiny26

• Flash (kbytes): 2 Kbytes
• Pin Count: 20
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 16
• Ext Interrupts: 11
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 11
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 0.12
• Eeprom (bytes): 128
• Self Program Memory: NO
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 3
• Pwm Channels: 4
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

Analog to
Digital
Converter
Features
94
ATtiny26(L)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The ATtiny26(L) features a 10-bit successive approximation ADC. The ADC is connected to an
11-channel Analog Multiplexer which allows eight differential voltage input combinations or 11
single-ended voltage inputs constructed from seven pins from Port A and four pins from Port B.
Seven of the differential inputs are equipped with a programmable gain stage, providing amplifi-
cation steps of 0 dB (1x) and 26 dB (20x) on the differential input voltage before the A/D
conversion. There are four groups of three differential analog input channel selections. All input
channels in each group share a common negative terminal, while another ADC input can be
selected as the positive input terminal. The single-ended voltage inputs refer to 0V (GND).
The ADC contains a Sample and Hold Amplifier which ensures that the input voltage to the ADC
is held at a constant level during conversion. A block diagram of the ADC is shown in Figure 51.
The ADC has an analog supply voltage pin, AVCC. The voltage on AVCC must not differ more
than ±0.3V from V
how to connect these pins.
An internal reference voltage of nominally 2.56V is provided On-chip, and this reference may be
externally decoupled at the AREF pin by a capacitor.
10-bit Resolution
±2 LSB Absolute Accuracy
0.5 LSB Integral Non-linearity
Optional Offset Cancellation
13 - 260 µs Conversion Time
11 Multiplexed Single Ended Input Channels
8 Differential Input Channels
7 Differential Input Channels with Optional Gain of 20x
Optional Left Adjustment for ADC Result Readout
0 - AVCC ADC Input Voltage Range
Selectable ADC Reference Voltage
Free Running or Single Conversion Mode
Interrupt on ADC Conversion Complete
Sleep Mode Noise Canceler
CC
. See the paragraph “ADC Noise Canceling Techniques” on page 105 on
1477K–AVR–08/10