MC9S08AW60CFGE Freescale, MC9S08AW60CFGE Datasheet - Page 163

• Manufacturer Part Number: MC9S08AW60CFGE
• Manufacturer: Freescale

Specifications of MC9S08AW60CFGE

• Cpu Family: HCS08
• Device Core Size: 8b
• Frequency (max): 40MHz
• Interface Type: I2C/SCI/SPI
• Total Internal Ram Size: 2KB
• # I/os (max): 34
• Number Of Timers - General Purpose: 8
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 44
• Package Type: LQFP
• Program Memory Type: Flash
• Program Memory Size: 60KB
• Lead Free Status / RoHS Status: Compliant

10.3.1
In addition to
considerations when migrating from a device that uses TPMV1.
Freescale Semiconductor
8
For more information, refer to
•
•
•
You can write to the Channel Value register (TPMxCnV) when the timer is not in input capture
mode for TPMV2, not TPMV3.
In edge- or center- aligned modes, the Channel Value register (TPMxCnV) registers only update
when the timer changes from TPMMOD-1 to TPMMOD, or in the case of a free running timer
from 0xFFFE to 0xFFFF.
Also, when configuring the TPM modules, it is best to write to TPMxSC before TPMxCnV as a
write to TPMxSC resets the coherency mechanism on the TPMxCnV registers.
Writing to the Channel Value Register (TPMxCnV)
register...
Updating the Channel Value Register (TPMxCnV)
register in edge-aligned or center-aligned modes...
Reseting the coherency mechanism for the
Channel Value Register (TPMxCnV) register...
Configuring the TPM modules...
Migrating from TPMV1
Section 10.3, “TPMV3 Differences from Previous
When...
Section 10.6.2.4, “Center-Aligned PWM
Table 10-2. Migrating to TPMV3 Considerations
MC9S08AC16 Series Data Sheet, Rev. 8
Timer must be in Input Capture mode.
Only occurs when the timer changes from
TPMMOD-1 to TPMMOD (or in the case of a free
running timer, from 0xFFFE to 0xFFFF).
Write to TPMxSC.
Write first to TPMxSC and then to TPMxCnV
register.
Mode.” [SE110-TPM case 4]
Action / Best Practice
Versions,” keep in mind the following
Chapter 10 Timer/PWM (S08TPMV3)
163