CS1D-II102D Omron, CS1D-II102D Datasheet - Page 175

no-image

CS1D-II102D

Manufacturer Part Number
CS1D-II102D
Description
CS1D Dual IO Interface Unit
Manufacturer
Omron
Datasheet

Specifications of CS1D-II102D

Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Basic Procedures
6. PLC Setup Settings
140
1,2,3...
Note The PLC Setup settings are arranged by word addresses when a Program-
These settings are the CPU Unit’s software configuration. Refer to SECTION
6 PLC Setup for details on the settings.
ming Console is used to make PLC Setup settings. Refer to Appendix D PLC
Setup Coding Sheets for Programming Console for details.
Examples:
Using the CX-Programmer
1. When setting the device type to “CS1H-H” for a Duplex CPU System, se-
2. Edit the PLC Setup and transfer it to the CPU Unit. (It can be transferred
• For Duplex CPU Systems, setting automatic recovery to duplex mode
• Settings for Duplex Communications Units (CS1W-CLK12-V1 and CS1W-
• For Duplex CPU Systems, settings to connect a Programming Device to
when an error causes a switch from duplex to simplex mode
CLK52-V1)
the RS-232C port on the standby CPU Unit to monitor PLC operation
(write operations will not be possible)
lect Duplex Settings from the Options Menu on the PLC Settings Window
to enable setting the PLC Setup for a CS1D from the CX-Programmer.
Note The device type setting on the CX-Programmer depends on the
separately or the CXP project can be saved and the PLC Setup can be
transferred together with the program.)
Note In a Duplex CPU System, transfer to PLC Setup to the active CPU
version of CX-Programmer being used. When setting the device
type to “CS1H-H” for a Duplex CPU System, select Duplex Set-
tings from the Options Menu on the PLC Settings Window to en-
able setting the PLC Setup for a CS1D from the CX-Programmer.
For other device type settings, the duplex settings can be made
without selecting this option.
Unit. (It cannot be transferred to the standby CPU Unit.)
Duplex CPU Systems
Single CPU Systems
System
CS1H-H
Not supported
CX-Programmer
version 3.@
CS1H-H or CS1D-H
CS1D-S
version 4 or higher
CX-Programmer
Section 4-2

Related parts for CS1D-II102D