CS1D-II102D Omron, CS1D-II102D Datasheet - Page 173

• Manufacturer Part Number: CS1D-II102D
• Description: CS1D Dual IO Interface Unit
• Manufacturer: Omron

Specifications of CS1D-II102D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Basic Procedures
Settings for Single CPU
Systems
138
Note In a Duplex CPU System, pin 4 (peripheral port communications settings) on
the DIP switches on the fronts of the CPU Units are disabled and the PRPHL
setting on the Duplex Unit is used instead. Also, pin 5 (RS-232C port commu-
nications settings) on the DIP switches on the fronts of the CPU Units are dis-
abled and the COMM setting on the Duplex Unit is used instead.
2. CPU Unit Settings
The DIP switch on the front of the CPU Unit must be set, along with other set-
tings. Be particularly careful when setting the peripheral port and RS-232C
port settings.
d) Set the communications switch on the Duplex Unit. When connecting
Note When connecting anything other than a Programming Console to
a) Set the DIP switches on the fronts of the two CPU Units to the same
b) Confirm that both CPU Units are the same model.
a Programming Console to the peripheral port, set the PRPHL switch
to OFF. When connecting the CX-Programmer to the RS-232C port,
set the COMM switch to ON.
settings.
the peripheral port, set the PRPHL switch to ON. When connecting
anything other than the CX-Programmer to the RS-232C port, set
the COMM switch to OFF.
ON
SW
COMM
A39512
PRPHL
Turn OFF when connecting
a Programming Console to
the peripheral port or the
active CPU Unit.
Turn ON when connecting
the CX-Programmer to
the RS-232C port or the
active CPU Unit.
RSV
Programming Device
Programming Console
Section 4-2