CV500BC101 Omron, CV500BC101 Datasheet - Page 352

• Manufacturer Part Number: CV500BC101
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BC101

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Handling Precautions
3. Mount the new Controller Link Unit in the PLC and connect the communi-
4. Set the unit number, node address, baud rate, and the terminating resis-
5. Turn on the power to the PLCs at all nodes in the Controller Link Network
6. Check that all the other nodes are active and then turn on the power to the
7. Using the Controller Link Support Software, read the network parameters
8. If the data links are not activated automatically, start the data links from the
9. Check that the data links are operating normally by monitoring them from
cations cables. (Refer to SECTION 3.)
tance for the new Unit to the same settings as the previous Unit. (Refer to
SECTION 4.)
other than those for which the Controller Link Unit was replaced.
PLC with the Controller Link Unit that was replaced.
and make sure the Network is operating normally.
data link startup node.
the Controller Link Support Software.
Section 9-6
327