CV500BC101 Omron, CV500BC101 Datasheet - Page 125

• Manufacturer Part Number: CV500BC101
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BC101

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4-4-2
4-4-3
100
CVM1 and CV-series Controller Link Units
Unit Number
Node Addresses
Note
Note
Set the unit number for each Unit using the rotary switches on the front of the
Unit. The unit number is used to identify a CPU Bus Unit within the PLC. Any
unit number can be set between 00 and 15.
Set the node address using a small flat-blade screwdriver, being careful not to
damage the rotary switches.
1. Always turn OFF the PLC’s power before setting the unit number.
2. When setting a Unit for the first time or changing the existing setting, create
3. Do not set the same unit number twice within the same PLC. An error will
4. When the Unit is recognized by the PLC’s CPU Unit, “NS” will be shown in
5. The default setting is “0.”
6. The unit number determines the words used by the Controller Link Unit in
Set the node address of each Unit in the Network using the rotary switch on
the front of the Unit. The node address is used to identify each node in the
Network.
The node address can be set to any value between 01 and 32.
Set the node address using a small flat-blade screwdriver, being careful not to
damage the rotary switches.
1. Always turn OFF the PLC’s power before setting the node address.
Setting method
Setting range
Node
Setting method
Setting range
Node
a I/O table in the PLC’s CPU Unit.
occur if the same unit number is set for two different Unit, and the CPU Unit
will not be able to recognize the Units.
the I/O table displayed for the CX-Programmer (Windows-based Support
Software).
PLC memory.
Item
Item
UNIT
NO.
X10
NODE
NO.
X10
1
1
2-digit decimal
00 to 15 (default is 00)
All nodes in the Network
2-digit decimal
01 to 32 (default is 01)
All nodes in the Network
0
0
0
1
X10
X10
Specifications
Specifications
1's digit
10's digit
1's digit
10's digit
0
0
Section 4-4