CV500BC101 Omron, CV500BC101 Datasheet - Page 120

• Manufacturer Part Number: CV500BC101
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BC101

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

C200HX/HG/HE Controller Link Units
4-3
C200HX/HG/HE Controller Link Units
Note
1. Always turn OFF the PLC’s power before setting the terminating resistance
2. Turn ON the switch to connect terminating resistance at the nodes at both
3. The TER LED indicator will light when the terminating resistance switch is
4. The default setting is OFF (not connected).
The following settings are required for a Controller Link Unit used with a
C200HX/HG/HE PLC.
Node address
Baud rate
Operating level
Terminating resistance
switch.
ends of the Network and turn OFF the switch at all other nodes. Normal
communication cannot be performed in the Network unless all the nodes
are set properly.
set to ON.
Item
Node address switches
Baud rate and operating level switch, pins 1 and
2
Baud rate and operating level switch, pin 4)
Terminating resistance switch
Switch
Section 4-3
96
97
97
98
Page
95