CV500BC101 Omron, CV500BC101 Datasheet - Page 110

• Manufacturer Part Number: CV500BC101
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BC101

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Constructing Networks with Repeater Units
Partial Conversion to Optical Fiber
Combining T-Branch Wiring (2-stage Repeater) and Partial Optical Fiber
Terminating
resistance: ON
Terminating
Resistance: ON
Terminating
resistance: ON
Note When constructing a network using Repeater Units, each segment must sat-
Segment 1
Segment 1
Terminating
resistance: ON
isfy all of the following requirements:
• The total number of Controller Link Units, Support Boards, and Repeater
• The total cable length of a single segment must not exceed the specified
• The maximum number of repeater stages that can be inserted into the
• The node at each end of a segment (including Repeater Units) must have
• The baud rates within each segment must be set to the same value.
Units within a single segment must not exceed 32.
value. (500 m at 2 Mbps; 800 m at 1 Mbps; and 1 km at 500 Kbps.)
path connecting any two nodes is two.
terminating resistance turned ON.
Terminating
Resistance: ON
Segment 2
(Optical fiber cable)
Terminating
resistance: ON
Terminating
resistance: ON
Terminating
Resistance: ON
Segment 2
Repeater Unit
CS1W-RPT02 or
CS1W-RPT03
Terminating
resistance: ON
Segment 3
Segment 4
Terminating
resistance: ON
Terminating
resistance: ON
Terminating
Resistance: ON
CS1W-RPT01
Repeater Unit
CS1W-RPT02 or
CS1W-RPT03
Repeater Unit
Section 3-4
85