CV500BC101 Omron, CV500BC101 Datasheet - Page 142

• Manufacturer Part Number: CV500BC101
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BC101

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Setting Data Links
Transferring from a Computer Node
Data Link Table Specifications
CS/CJ-series PLCs
Note
4. When using the Controller Link Support Software to set a CJ-series Con-
A data link table is created for each node using the Controller Link Support
Software. The data link tables contain all the settings required to create the
data links.
1. The following three methods can be used to start data links. (See p. 155.)
2. To create data link tables using the Controller Link Support Software, the
PLC model
Nodes
Setting item
troller Link Unit, use one of the following methods to set the type of PLC.
network must have been constructed correctly. Set routing tables at each
node as required. See Applications Precautions on page xxiv. for details.
• Set the type of PLC to “Others.”
• Add the following information to the device information setting file
• Using a software switch
• Using the Controller Link Support Software or CX-Net (in CX-Program-
• Using an FINS command
Controller Link
Support Board
(CLKTYPE.TXT) in the Controller Link Support Software to add the
CJ-series PLC and then set the CJ-series PLC.
CJ1G-CPU44: Same settings as the CS1G-CPU44-E
CJ1G-CPU45: Same settings as the CS1G-CPU45-E
For details on editing device information setting files, refer to the Con-
troller Link Support Software Operation Manual (W308).
mer)
Controller Link
Support Software
Setting data link tables
Set the model of the PLC’s CPU Unit.
1 to 32
Set the address of the refresh nodes.
It cannot be set to a parameter exceeding the “maximum node
address” of the network parameter.
IBM PC/AT or compatible
computer
Setting range
Section 5-2
117